Physiological effects of different Cd concentrations on maize root architecture and classification北大核心CSCD

In this research, a hydroponics experiment was conducted to apply different concentrations of cadmium (Cd) (0, 5, 10, 25, 50, 100, 200 μmol·L-1) to maize seedlings with two leaves and one new leaf, in order to explore the effects of the different Cd concentrations on the maize seedling growth, Cd absorption kinetics and root morphology and classification. After 5 days of Cd stress, the maize seedings were sampled, the plant height, main root length, aboveground and underground biomass, root architecture, Cd content and photosynthesis and related parameters were measured. It was found that with increasing Cd stress, the plant height, main root length, biomass and tolerance index of shoots and roots, total root length, root surface area, root volume, root forks and root tips all decreased significantly; Root average diameter and root:shoot increased significantly (P<0.05). Meanwhile root parameters (root length, root surface area and root volume) of root diameter classes designated Ⅰ-Ⅲ (0-1.5 mm) showed a decreasing trend, which had a significant (P<0.05) negative correlation with root Cd concentration. The proportion of root length, root surface area and root volume with diameter between 0-0.5 mm showed a downward trend under Cd stress. Under Cd stress, Cd concentration and accumulation in underground and aboveground parts of maize seedlings increased significantly, chlorophyll content decreased, and photosynthesis was inhibited. This study has shown that Cd affected root development mainly by inhibiting the growth and morphology of fine roots, and inhibited photosynthesis, elongation and biomass accumulation of the aboveground and underground parts of the maize seedings. © 2022, Editorial Office of Acta Prataculturae Sinica. All rights reserved.     

T1 locus in cotton is the candidate gene affecting lint percentage, fiber quality and spiny bollworm (Earias spp.) resistance

A genetic linkage map of chromosome 6 was constructed by using 270 recombinant inbred lines originated from an upland cotton cross (Yumian 1 × T586) F₂ population. The genetic map included one morphological (T₁) and 18 SSR loci, covering 96.2 cM with an average distance of 5.34 cM between two markers. Based on composite interval mapping (CIM), QTL(s) affecting lint percentage, fiber length, fiber length uniformity, fiber strength and spiny bollworm resistance (Earias spp.) were identified in the t₁ locus region on chromosome 6. The allele(s) originating from T586 of QTLs controlling lint percentage increased the trait phenotypic value while the alleles originating from Yumian 1 of QTLs affecting fiber length, fiber length uniformity, fiber strength and spiny bollworm resistance increased the trait phenotypic value.     

Genetics of Resistance in Vicia sativa L. to Orobanche crenata Forsk.

The genetics of resistance of common vetch (Vicia sativa L.) to broomrape (Orobanche crenata Forsk.) was studied for two years by using the P₁, P₂, F₁, BC¹, BC₂, F₂ F₃, and F₄ generations obtained from crosses between resistant and susceptible lines. Resistant lines were selected by screening a world collection m a naturally infested plot. Resistance was tested both under field and greenhouse conditions. The best index to measure resistance was the number of emerged broomrapes per host plant. The results fit the additive-dominance model. The main component of the variation was additivity; dominance and interaction effects seemed to depend on the environment. When dominance is expressed, a low number is dominant over a high number of broomrapes per host plant.     

Widening the gene pool of cultivated lentils through introgression of alien chromatin from wild Lens subspecies

Wild Lens species/subspecies are a potential source for increasing genetic diversity in cultivated lentil. Four intraspecific crosses were attempted between cultivated and wild lentils. Viable hybrids were produced between L. culinaris ssp. culinaris × L. culinaris ssp. orientalis and L. culinaris ssp. culinaris × L. culinaris ssp. odomensis. Normal meiosis and pollen fertility were observed in the first set of crosses, whereas chromosomal abnormalities and reduced pollen fertility were observed in the second set of crosses. These crosses were also studied for some quantitative traits. The range, mean and coefficient of variation were calculated in parents, F₁, F₂ and BC₁ generations to determine the extent of variability generated in the cultivated lentil through introgression of genes from wild lentil. The cultivated lentil × L. culinaris ssp. orientalis crosses showed substantially higher variability for all the traits than crosses involving cultivated lentil ×L. culinaris ssp. odomensis. The results of the present study indicated that these wild subspecies can be exploited for breeding purposes and their variation can easily be utilized to widen the genetic base of the cultivated lentil.     

QTL analysis of seed dormancy in rice (Oryza sativa L.)

Effective cumulative temperature (ECT) after heading would be a more reasonable parameter for seed sampling of pre-harvest sprouting/seed dormancy (SD) tests in segregating populations than the days after flowering. SD is an important agronomic trait associated with grain yielding, eating quality and seed quality. To identify genomic regions affecting SD at different grain-filling temperatures, and to further examine the association between SD and ECT during grain-filling, 127 double haploid (DH) lines derived from a cross between ZYQ8 (indica)/JX17 (japonica) by anther culture were analyzed. The quantitative trait loci (QTLs) and their digenic epistasis for SD were identified using a molecular linkage map of this population. A total of four putative QTLs for SD (qSD-3, qSD-5, 6 and 11) were detected on chromosomes 3, 5, 6 and 11, together explaining 41.4% of the phenotypic variation. Nine pairs of digenic epistatic loci were associated with SD on all but chromosome 9, and their contributions to phenotypic variation varied from 2.87%–8.73%. The SD QTL on chromosome 3 was identical to the QTLs found in other mapping populations with different genetic backgrounds, which could be a desirable candidate for gene cloning and marker-assisted selection in rice breeding.     

Identification of quantitative trait loci underlying milling quality of rice (Oryza sativa) grains

Milling quality of rice grains is important to both producers and consumers. In this study, quantitative trait loci (QTLs) controlling brown rice rate (BR), milled rice recovery (MR) and head rice recovery (HR) were analysed by composite interval mapping over 2 years using 98 backcross inbred lines (BILs). A total of 12 QTLs for the three traits were detected, of which five were for BR, four for MR and three for HR. The proportion of phenotypic variation explained by individual QTLs ranged from 7.5 to 19.9%, and additive effects contributed by a single QTL accounted for 0.46 to 2.34% of the variation. QTL‐by‐environment interactions were observed by comparing QTL mapping of the same population grown in two consecutive years. Three of five QTLs for BR and two of four QTLs for MR were detected in 2 years, and all three QTLs for HR were detected in 1 year only. BR was significantly correlated with MR, and all four QTLs of MR were located in the same regions as those of BR. This indicated that QTLs for highly correlated traits could often be detected in the same interval.     

Genetic diversity in the parental lines and heterosis of the tropical rice hybrids

Genetic diversity within and between the maintainer (B) and restorer (R) lines used in hybrid breeding programs of the Philippine was investigated with information from analysis of pedigree record, quantitative traits and SSR assays. Mean coefficients of coancestry were calculated as 0.11 within R lines, 0.27 within B lines, and 0.04 between R and B lines, indicating greater diversity among R lines than among B lines, and the significant divergence between B and R lines. These results are consistent with those obtained from quantitative trait analysis and SSR marker assays. Relative gene diversity for 37 random SSR markers averaged 0.20 within B lines,0.28 within R lines, and 0.52 between two groups of lines. There were no consistent associations among various genetic diversity measures. Random sets of SSR marker and pedigree based diversity measures had no significant correlation with mid-parent heterosis for grain yield and biomass, indicating that prediction of heterosis for complex traits based on these two genetic diversity estimates is difficult. This revised version was published online in August 2006 with corrections to the Cover Date.     

Leaf yield component combining abilities in mulberry (Morus spp.)

A line × tester analysis was carried out in mulberry (Morus spp.) to determine the genetic interaction in the expression of various quantitative characters including leaf yield. Eight clonal varieties were selected, 3 of them were designated as lines (♀) viz. Berhampore-1, China white and MS-5 and 5 of them were called as testers (♂) viz. Mandalaya, Kosen, Assamjati, MS-1 and Kajli. Combining ability studies were conducted on these parents along with their F₁ hybrids for the variables laminar index, growth rate, weight of 100 dry leaves, number of primary branches per plant, plant height, nodal distance, leaf-twig ratio, aerial biomass, moisture content, moisture retention capacity and leaf yield. Broad genetic variability was observed among the genotypes. The ratio of General Combining Ability (GCA) and Specific Combining Ability (SCA) indicated the predominance of non-additive genes in mulberry. While China white (female) and MS-1 (male) were the best general combiners among the parents, Berhampore-1 × Kajli was the best cross for leaf yield. Results suggest that selective crossing followed by proper screening may be the best approach for breeding of high yielding varieties in mulberry. This revised version was published online in July 2006 with corrections to the Cover Date.     

棉花产量育种的数量性状分析

产量是棉花育种的主要目标之一，为提高棉花产量育种效率，本文从产量结构模式、产量与其构成因素的相关关系两方面，分析了与棉花产量育种有关的数量性状，并讨论了提高棉花产量遗传潜力的可能性     

RFLP characterization of Indian Musa germplasm for clonal identification and classification

Summary Nineteen single-copy clones isolated from a PstI genomic library (cv. Maiden Plantain), and eight Vigna chloroplast DNA clones were used to probe total genomic DNA digests of 57 genotypes of Musa from India. The 19 genomic clones detected a total of 107 polymorphisms among the 57 genotypes. Principal coordinates and phenetic analyses of these data placed cultivars and species into distinct groups that were in general agreement with a previously published RAPD-based classification of these same plant materials. The 107 polymorphisms were sufficient to differentiate each clone from every other clone. Heterologous Vigna chloroplast DNA probes were used to characterize the cytoplasm of Musa cultivars and species. PCO analysis of these RFLPs were detected both within and between the generally recognized genome groups, indicating multiple hybridization pathways in the origin of hybrid clones. Data presented demonstrate that RFLPs are sufficiently abundant to classify Musa germplasm and that genetic relationships among Musa cultivars, based upon RFLP data, are in general agreement with relationships determined by analysis of morphology and RAPDs.